Do you fly, drive or boat with FPV, or do aerial photography? We?re pleased to introduce the Eagle Tree OSD Pro. The OSD Pro displays all the key information about your model?s status, and has many advanced features such as voice alerts, high resolution raster graphics, a new ?RADAR? synthetic map, ?Return to Home,? and waypoints within visual range.

How it Works

The OSD Pro is a powerful, modular, fully configurable Video/Audio On-Screen Display (OSD) device, providing graphics, voice announcements, alarms, acoustic variometer with total energy compensation, Home Arrow, Return to Home, Failsafe, "RADAR", waypoints, a flight simulator for testing, and many other features.

The information displayed can be as simple or advanced as you like, depending on how you configure the display and on which optional Eagle Tree sensors are connected.

What Data Parameters can be Displayed on the OSD Pro?

All parameters available with our eLogger V3 and Data Recorders + optional sensors will be supported for display on the OSD Pro. Here are some examples:

• GPS Parameters (Distance to Home, Home Arrow, GPS Altitude, Ground Speed,Course, and more)
• Electrical Parameters (Pack Volts, Amperage, RX Volts, Servo Current, Milliamp-Hours, Watts)
• Performance Parameters (Airspeed, Barometric Altitude, Climbrate, Variometer,Temperatures, RPM, G-Force, EGT, Jet ECU Status, servo positions)
• Receiver Health (Dropped Frames, Antenna Fades, Missed Packets - requires Spektrum or JR FlightLog compatible Receiver)
• Call Sign, and many more

The OSD PRO advanced features include "RADAR," Voice Alerts, Return to Home, failsafe and Waypoints.

RADAR
The plane icon labeled "RADAR" above serves two purposes: the direction the icon is pointing indicates your present course. And, the location of the icon on the screen provides a synthetic map, similar to RADAR: the center of the screen marks the takeoff point, in a "bird's eye" view, and the plane icon moves around the screen indicating your model's location. The maximum distance and the "up" direction is configurable.

Voice Alerts/Variometer
Imagine hearing the status of your model through earbuds connected to your video receiver! The OSD Pro fully supports voice warnings and status updates, via the audio channel of your video transmitter. Most of the available parameters can be programmed to provide voice alerts.
For example, you can program the OSD Pro to periodically update you on altitude once a minute: "Altitude 3-9-1 Feet". And, you can also program a low voltage warning "WARNING- Voltage 12-point-5 Volts". Voice alerts can be combined with your camera's microphone, so you do not lose motor or other flight sounds when there are no alerts.
Additionally, a varying tone Variometer with Total Energy Compensation (completely configurable from the on-screen menus) is included. Any of our altimeters, or GPS altitude, will work with the variometer. But, the altimeters built into our Glide and Pro recorders have very high resolution, which is required for the variometer to be useful in finding thermals. You'd use the recorder instead of our eLogger as the 'data collector' if you need thermal sniffing capability. The OSD-Pro will work with either one.

Return to Home and Failsafe
The Return To Home feature will attempt to bring your stable plane in a "holding pattern" above the takeoff point if radio signal is lost, by manipulating your model's rudder/ailerons, elevator, and throttle, based on your settings. GPS and other sensor information is used to attempt to return the plane to home. Note that this feature requires configuration of several parameters via our on-screen menus. An on-screen Return to Home configuration wizard is built in to simplify this process. The feature may require "trial and error" testing, and may not work with all planes or under windy conditions. If you have a stabilization system, this process is greatly simplified. We plan on releasing additional sensors that will further simplify this feature. A Failsafe feature is also included, if Return to Home is not desired, or you are not using GPS. The failsafe feature sets your aileron/rudder, throttle, and elevator to programmable positions, if radio signal is lost. This is most useful for radios without built-in failsafe. The Return to Home and Failsafe features work with all known radio types.

Flight Simulator
A built-in flight simulator is included, letting you fly the RADAR icon around the screen, controlling altitude, throttle and turns with your RC Radio. Since the control surfaces of your model will move at the same time, this feature makes it easier to configure Return to Home and test your alarms and settings, and is also fun on rainy days!

Waypoints
Up to 3 waypoints (within visual range of the takeoff point) can be programmed into the OSD Pro, for aerial photography or just for fun. The locations of the waypoints are displayed on the RADAR display, making it easy for you to manually fly to the waypoints (the system will not autonomously fly to the waypoints).

The OSD Pro Expander has the following connections:

• Connection to the eLogger or Data Recorder
• Servo-style connections to your camera's "video out" port and your video transmitter's "video-in" port
• Servo-style connections to your audio microphone (if you have one) and to your video transmitter's audio in port.
• Servo connections for controlling the OSD from your radio, and for Return to Home and Failsafe features. The servo connections are Aileron/Rudder In and Out, Elevator In and Out, Throttle In and Out, Aux 1 In, and Aux 2 In. Note that the Aux 1 channel must be dedicated to the OSD Pro, but the Aux 2 channel may be shared with other functions on your model.
• Five male to male Servo extension cables are included for hooking up to your servos.

Delivery includes: Video OSD Expancder Pro, connection cables, operating instructions (English)