The GF PX690 FPV camera comes with the newest intelligent technologies to get the best picture even in very bright lightconditions as we have them in normal FPV flying usually.

The digital WDR (Wide Dynamic Range) Technology makes it possible to show the best image even in backlight, by increasing exposure in dark areas while decreasing it in bright areas.

Digital Noise Reduction (DNR) brings a clear and high resolution picture in bad conditions.

The PIXIM Seawolf CMOS can perform a perfect exposure of EVERY Pixel over the image (CCD only the whole picture) so it can find the best exposure for different bright or dark areas over the picture and make it to the best FPV Camera for professional useage.

With the extra programming board you can change all important values regarding to you usage. You have 4 Presets and can make your own custom setting and save it as well. There is a seperate programming port with a cable, you don´t have to use the videocable like with other cameras.

Specifications

• Sensor: 1/3rd inch PIXIM Seawolf CMOS
• Effective Pixels: 720x540 (PAL)
• Resolution: 690 TVLines
• S/N ratio: Selectable
• Gamma: Selectable
• Illumination Sensitivity: 0.8 Lux
• Gain Control: Selectable
• BLC: Selectable
• White Balance: Selectable
• Electronic Shutter Speed: Selectable
• Sync System: Internal Synchronization
• Video Output: Selectable
• Mirror Image: Selectable
• Day & Night: Selectable
• Zoom: 4x digital 
• WDR: auto/high/low
• DNR: auto/high/low
• Video IO select: PAL / NTSC

• Power Supply: DC 10 - 12V +/- 10%
• Current Consumption: 170 mA max at12V
• standard lense: DC Shutter with 2.8-10.6 mm 
• Size: 34x47x63mm
• weight: 52g