Hintergrund Picture
Hintergrund Picture

Streamline Cable Cam

  • Item no.: 3467
Let us help now +49 9401 949 88-88
Description
Streamline Cable Cam for DJI Ronin and similar gimbals

This device was used for a function test through us.It has only minimal usage signs.

The Streamline Cable Cam was designed with no expenses spared. It was designed to handle heavy loads, to be rugged, and at the same time keeping the weight of the unit as low as possible.

The majority of the components are made from high grade aluminum. All parts are precision fabricated using the latest technology. Most of the components are then black anodized to get a nice resilliant finish.

We decided not to sell the Streamline with a gimbal. Instead we are in the process of making adapters to commonly used gimbals. Currently we offer a quick release adapter for the DJI Ronin. For those who use the FreeFly MoVI gimbals we have included holes in the bottom plate to accept the "Toad-in-a-Hole" adapter. Please contact us if you want help adapting your gimbal of choice to the Streamline.
For mounting a DJI Ronin / M / MX we recommend the DJI Ronin Universal Mount ( article no. 2380)

The Streamline is driven by a powerful motor that provides great torque. The speed controller incorporates many built-in safety features that makes it just about impossible to damage it. The whole set-up is super quite and the only noise is that caused by the wheels moving down the line. The speed controller also incorporates regenerative breaking.

We selected to include a high quality Futaba transmitter for controlling the Streamline. The controller has built in telemetry that allow you to monitor battery voltage in real time. If the voltage dropps below a preset value, the transmitter will give the operator an audible warning. This way you can avoid damaging the Lipo batteries.

The battery is mounted on a set of 15mm rods. These rods can easily be removed for transport by loosening two thumb screws. The battery position can be adjusted in order for the Stramline to properly balance on the cable and this also allows for different size batteries to be used. There are four 1/4 inch holes on the side of the frames for mounting additional equipment if so desired.

We recommend using 8mm no-stretch climbing rope. The Streamline can handle ropes/wires up to 10mm. Make sure that the fixtures used are sufficent to withstand the forces that will be applied.
Attention: There is no leading role for a safety rope included.

When installing the Streamline on the cable, the base plate is removed and the unit is dropped down on top of the cable. The base plate is then reattached and secured using two bolts. If using the quick release mounting system, then all you need to do is snap the gimbal in place and tighten the thumb screw. This is a very quick and simple solution that can be done inunder two minutes.

You need a conventional radio controller, fitting LiPo batteries (3-6S with XT90 bush) and a battery charger.
More Product Details
Data sheet
Technical Specifications
  • Dimensions (L,W,H): 970x210x205mm
  • Width 385mm with rods
  • Weight: 3,0kg (6.6 lbs) without battery
  •  Max Payload Tested: 15kg (33 lbs)
  • Max speed (estimated): 50km/h (45 mph)
  •  With recomended 4S battery
  • Voltage Range: 12-25V (3-6S LiPo)
  • Max distance: Depending on rigging fixtures
  • Max Inclination (@ max payload): 10%
  • Endurance (depending on payload etc): approximately 60 minutes
  • Max cable diameter: 10mm
Videos

Looking for personal advice? You have any questions and need advice from our experienced staff? Call us: +49 9401 949 88-88 or send an email:
info@globe-flight.de
We are looking forward to your call:
Monday to Thursday 9am - 5pm and Friday 9am - 2pm