5,8 GHz Immersionflight SET ADVANCED
Our price
starting from
119,95 €

including 19% VAT, plus shipping

RRP: 139,90 €
You save 14.26%, that is 19,95 €
configurable

Item number: 0136

Manufacturers: Globe-Flight

Delivery status: depending on components

5,8 GHz video transmitter (included)
5,8 GHz video transmitter (included)

  • 5,8 GHz ImmersionRC TrampHV A/V Transmitter

    Compatible with 2,4 GHz RC systems. such as FASST, Spektrum, Jeti Duplex.

    Specification:

    • Power: 25mW
    • Channels: max. 48
    • Supply Voltage: 7-25 V DC (2-6S)
    • Connectors: JST-GH 4-Pin, JST-GH 6-Pin
    • Dimensions: 32x20x8mm
    • Weight: 4g

    Configuration:

    A:     Audio
    T: Telemetry
    V: Video
    5V: 5V Output
    G: Ground
    +: Working Voltage

    In the box: 25mW A/V-Transmitter, cables with open leads, cables with JST-GH connectors

5,8 GHz Videoempfänger
5,8 GHz Videoempfänger

  •  Version V4.1 with 40 channels as Race Band Edition and even increased receiving power with new receiver modules


    Small High Quality A/V-Receiver.

    Compatible with all 2,4 GHz RC systems like FASST, Spektrum, Jeti Duplex!

    Note: The UNO receiver comes with preadjusted F band (for ImmersionRC/Fatshark video transmitters). If you want to use the additional bands, simply push and hold the two front buttons during power up. 

    Tech specs:

    • Sensitivity: up to -90dBm
    • Channels: 8x F band (5740,5760,5780,5800,5820,5840,5860, 5880 MHz) + 8 RaceBand channels + 24 additional channels
    • Video outputs: 2x 3,5mm Jack
    • Supply Voltage: 6-13 V DC
    • Size: 85x75x25mm
    • Weight: 130g (with antenna)

    The receiver comes with: 1x  A/V cable, 1x antenna, 1x power cable
5,8 GHz Antenna Standard

If you do not choose an optional circular antenna, please choose this article. The video transmitter does not include an antenna.

5,8 GHz Antenna Standard

  • 3dBi Antenna with SMA connector for 5,8 GHz transmitter and receiver.

    No Dual Band Antenna

optional 5.8G upgrade antennas
optional 5.8G upgrade antennas

  • 5,8 Ghz linear polarisierte FPV Richtfunkantenne, passend zu linear polarisierten Stabantennen (am Videosender bzw. als zweite Antenne bei Diversity-Systemen).

    Diese Antenne erhöht die Reichweite und Stabilität Ihres Videosystems. Eine Antennennachührung wird empfohlen. Idealerweise sollte die Antenne auf einem Stativ oder ähnlichem montiert aufgestellt werden, dabei sollte die vordere flache Seite auf das Fluggerät gerichtet sein.

    Daten:

    • Gain: ~12dBi
    • Öffnungswinkel Horizontal: 55°
    • Öffnungswinkel Vertikal: 60°
    • Polarisation: Horizontal u. Vertikal
    • Anschluss: SMA
    • Abmessungen: 100x100x20 ( mm)
    • Gewicht: 100 Gramm
    • Kabellänge: 30cm

    ACHTUNG nur für A/V FPV Videoempfänger geeignet, nicht zum senden oder für WLAN-Anwendungen

    Reichweitentest gibts in unserem FPV Blog (KLICK MICH)

    Globe-Flight 12dBi 5,8GHz AV/RX directional FPV antenna from Mashu on Vimeo.

  • The antennas are clockwise polarised and ensure a highly stable video downlink, which makes them perfect for FPV flying.

    The antennas can be bent easily and they will remain in their position, so you can make them fit in any of your RC models. The connector is SMA style (with a pin in the middle), matching or ImmersionRC and Fatshark video transmitters/receivers, the Fatshark Attitude video goggles and the Black Pearl diversity monitor.

    These antennas are omnidirectional without directivity, and the radiation angle is comparable to the shape of a doughnut. The additional range is caused by the increased stability compared to linear omnidirectional antennas. For an even higher range, this set can be combined with our circular directional patch antennas.

    In the box:

    1x5,8GHz SPW antenna clockwise circular polarised
  • The antennas are clockwise polarised and ensure a highly stable video downlink, which makes them perfect for FPV flying.

    The antennas can be bent easily and they will remain in their position, so you can make them fit in any of your RC models. The connector is SMA style (with a pin in the middle), matching or ImmersionRC and Fatshark video transmitters/receivers, the Fatshark Attitude video goggles and the Black Pearl diversity monitor.

    These antennas are omnidirectional without directivity, and the radiation angle is comparable to the shape of a doughnut. The additional range is caused by the increased stability compared to linear omnidirectional antennas. For an even higher range, this set can be combined with our circular directional patch antennas.

    In the box:

    1x5,8GHz SPW antenna clockwise circular polarised

  • The 8dBi Mini Patch Antenna was especially designed for FPV use.
    Due to the small size and minium weight of 7g the antenna is ideal for using on video googles!
    A 90° beam angle realiszes a incredibly stable and uncomplicated FPV-use!

    We recommend mounting this antenna with the semi-rigid extension item no. 2252

    • 100% high quality material
    • male SMA port for all ImmersionRC and Fatshark receivers
    • Right-Hand Circular Polarization
    • 5,8 Ghz ISM Band
    • 8dBi Gain
    • F/B Ratio >35dB
    • VSWR < 1:1.35 bei 5800 MHz
    • Beam Angle: -3dB at +/- 45° (H+V)
    • Weight: 7g

    In the box: 1x Mini Patchantenne

  • This 5.8GHz Circularly Polarized patch antenna was custom-designed, with no expense spared, for the FPV market. Light enough to be mounted directly onto an LCD headset, or directly onto the front of one of our Uno, or Duo receivers. 
    This antenna will breathe new life into the CE-Legal 25mW systems, allowing multi-km range with ease

    We recommend mounting this antenna with the semi-rigid extension item no. 2252
    • Precision manufactured with very tight tolerances and 100% tested on a professional antenna tester (Rhode & Schwartz) to ensure maximum range and performance.
    • SMA connector compatible with all FatShark/ImmersionRC 5.8GHz products sold to date. 
    • Right-hand circular polarization
    • 5.8GHz ISM Band
    • 13dBi gain
    • Beam width 35 degrees (H + V)
    • F/B Ratio 26dB
    • VSWR < 1.5:1 (5740 - 5860MHz)
    • Impedance 50ohms

         

     

  • GF Semi-Rigid Antenna Extension for patch antennas

    The perfect solution for mounting patch antennas to your video googles.

    Being semi-rigid (just like ImmersionRC SpiroNet antennas) it can be perfectly adjusted and keeps it's direction as well.

    Length: 8,5cm

    In the box: 1x semi-rigid Antenna Extension (Length 8,5cm), 1x Nut, 1x Washer

  • 30cm
FPV cable Plug and Play

Cable set for 5.8 GHz Tramp video transmitter

FPV cable Plug and Play

  • ImmersionRC TrampHV cable pack

    Several cables and a TNR Tag.

    In the box: cables with open leads, cables with connectors,TNR Tag

FPV camera
FPV camera

  • In the box:

    1x Camera
    1x RCA Videocable
    1x 5D-OSD cable

  • RunCam Swift Mini FPV Kamera 600TVL

    Die neue Runcam SWIFT Mini FPV Kamera meistert eine Vielzahl an verschiendenen Herausforderungen beim FPV-Flug mit Bravour!
    Mit einem 2,8mm Objektiv und einer horizontalen Öffnungswinkel von 90° ist die Kamera perfekt für den FPV-Flug ausgestattet.
    Durch präzise Belichtungsalgorithmen ist ein gut sichbares FPV-Bild in schwierigen Situationen stets gewährleistet.

    Verschiedene Montagemöglichkeiten

    Montieren sie die Kamera mit den beiliegenden Adaptern in gewünschter Position am Modell.
    Hängend als Unterbau, integriert in Racer, oder konventionell mit dem Halter auf dem Modell sitzend stehen ihnen alle Möglichkeiten öffen.

    Kompaktes Design

    Durch das kompakte Design der Kamera passt diese in nahezu jedes Flugmodell.
    Die RunCam Swift besticht durch ihre sehr geringen Maßen von 26x26x30mm und nur 12g Gewicht.

    Breiter Spannungsbereich

    Der Spannungsbereich der Kamera beträgt 5V bis 17V DC.
    Somit ist der Einsatz in allen Modellen von 2S bis 4S ohne weitere Einschränkung möglich.

    Lieferumfang:

    1x Kamera
    1x Basishalter
    1x Hängehalter
    1x Rückseitige Abdeckung
    1x RCA Videokabel
    1x FPV Silikonkabel
    1x 5D-OSD Kabel
    1x Schraubensatz

  • Small and lightweight CMOS camera for small FPV planes.

    • Resolution: 700TVL
    • Foocal length: 2,8mm 
    • FOV: 100°
    • Overall weight with video cable: 15g
    • Size of the camera head: 20x20mm
    • Voltage: 3.3-5V
    • Power consumption: 60mA

    Plug and Play with ImmersionRC and Fatshark video transmitters.

  • The KX-171 was specially designed for FPV flying, it is smaller and more lightweight than other cameras and it can handle low light conditions well.
    The camera comes with a monitor connection cable which has a built-in electronics module. You can easily adjust the camera settings via on screen display. 

    Note: The KX-171 does not work with iOSD mini.

    Datasheet:

    • Chip: 1/3" SONY CCD
    • Resolution: 420 TV lines
    • Auto White Balance S/N Ratio: Better than 46dB
    • Gamma Characteristic: 0.45
    • Sensitivity: Day: 1.0 Night:0.05 Lux
    • Power supply: 5-15V  DC @ 100mA
    • Dimension : 20 X 20mm
    • Lens: 3,6mm
    • Connector: 4 pin

    In the box: Camera (PAL), monitor connection cable with adjustment module, mounting bracket, screws

  • With the menu buttons on the back of the camera, you are able to adjust every setting on the camera to your liking. Some settings include

    This allows you to get the perfect picture no matter what the light conditions are. You can also set the camera to display a line of text on the screen, such as your amateur radio id. You can move the text around the screen to get it to the position which gives you the best visibility.

    Specifications

    • Sensor: 1/3rd Sony HAD CCD
    • Effective Pixels: 510x492 (NTSC), 500x582 (PAL)
    • Scanning System: 525 Lines, 60 Fields/Sec (NTSC) 625 Lines, 50 Fields/Sec (PAL)
    • Sync System: Internal Synchronization
    • Resolution: 600 TVLines
    • S/N ratio: Selectable
    • Gamma: Selectable
    • Illumination Sensitivity: 0.5 Lux / Day: 0.5 Lux, Night: 0.05 Lux
    • Gain Control: Selectable
    • BLC: Selectable
    • White Balance: Selectable
    • Electronic Shutter Speed: Selectable
    • Video Output: Selectable
    • Mirror Image: Selectable
    • Day & Night: Selectable
    • Power Supply: DC5-15V +/- 10%
    • Current Consumption: 80mA +/- 10%
    • weight: 45g
    • Dimension: 35x35x30mm
    • standard lense: 3,6mm

    with the camera comes the cable with RCA connectors a manual and a mounting bracket.

Monitor - Videogoggle
Monitor - Videogoggle
  • Now even improved with 720p HDMI support and new face plate with fan!

    The Dominator V3 FPV goggle features an immersive 16:9 widescreen display for compatibility with HD content and HD digital video links. It supports side/side 3D content in (both analog and HDMI) and is NTSC/PAL auto switching. Integrated DVR records your analog footage and has playback function that may assist in lost model recovery. If the power is disconnected or the battery runs flat, the DVR will auto-save any recorded video, preventing a corrupted card or loss of data.

    HDMI display port has a robust mini HDMI port for a secure connection to HD input devices and supports up to 720p input, perfect for DJI Insppire 1 or Phantom 3 with HDMI extension module!

    Modular design means only purchasing the features you need. Dominator goggles support Trinity head tracking as well as the full variety of receiver modules, allowing you to choose the frequency and functions best suited to your location or situation.

    DominatorV3 ships with a fan equipped faceplate for exceptional comfort and lens fogging prevention.

    Specifications:
    FOV 30°Diagonal
    57-72mm IPD Range (adjustable)
    WVGA 800 X 480 Display
    Support Side/Side 3D
    NTSC/PAL Auto Selecting
    HDMI 720p Support
    Integrated Analog DVR (no HDMI recording)
    Modular Head Tracker Bay

    Package contents:
    Dominator V3 Headset with fan equipped face plate
    Zipper Case - 7.4V
    1800mAh Battery with LED indicator and Micro USB charging port, for conventional smartphone chargers
    AV Cable - Mini to Mini HDMI Cable (includes Mini to Micro, Mini to Standard HDMI Adapters)

  • 4,3 Zoll (11cm) großer sehr heller Monitor mit Sonnenblende ideal für den FPV Einsatz.
    Der Monitor ist in direktem Sonnenlicht gut verwendbar und hell genug um sicher fliegen zu können.

    Ideal als Live View Vorschaumonitor für Luftbildfotografen geeignet.

    Der Kabelbaum des Monitors ist ca. 30cm lang und hat:
    - 1x Chinch für Videoquelle
    - 1x Klinke zum Videoempfänger
    - 1x DC Hohlbuchse (Pluspol innen) für Stromversorgung, z.B. über 3S Lipo-Akku
    - 1x DC Hohlstecker für Versorgung eines Videoempfängers (Es wird die Spannung der Stromversorgung durchgeschleift).

    Mit diesem Kabelbaum ist der Monitor Plug and Play mit unseren ImmersioRC UNO / DUO Videoempfängern, nur das Stromkabel muss an Ihre verwendeten Akkuverbinder angepasst werden.

    Hinweis: Der Monitor zeigt nur ein Bild, wenn ein Video-Signal eingespeist wird.

    Eigenschaften:

    • 350cd/m²
    • entspiegeltes Display
    • PAL und NTSC fähig
    • 16:9 (automatische Skalierung oder per Menü)
    • Spannungsversorgung 12V (3S Lipo-Akku)
    • RGB 480x272 Pixel (bei der Größe völlig ausreichend)
    • Monitor aktiviert sich erst mit anliegendem Videosignal
    • Menü mit Enstellmöglichkeiten
    • Stromverbrauch ca. 4 W

    Lieferumfang:

    • 1x 4,3" Monitor
    • 1x Sonnenblende  
    • Stromkabel
    • Bedienungsanleitung

     

    Abmessungen: 12,5 x 9 x 1,7cm Gewicht: ca. 200g

  • 7 Zoll (18cm) großer sehr heller Monitor mit Sonnenblende ideal für den FPV Einsatz.
    Der Monitor ist in direktem Sonnenlicht gut verwendbar und hell genug um sicher fliegen zu können.
    Es sind an der Seite 2 M4 Gewinde für die Verschraubung sowie ein Stand/Klebefuss für eine Rückwandmontage vorgesehen.

    Der Kabelbaum des Monitors ist ca. 30cm lang und hat:
    - 2x Chinch für 2 Videoquellen
    - 1x DC Hohlbuchse (Pluspol innen) für Stromversorgung, zb. über 3S-Lipo
    - 1x DC Hohlstecker für Versorgung eines Videoempfängers (es wird die Spannung der Stromversorgung durchgeschleift).

    Mit diesem Kabelbaum ist der Monitor Plug and Play mit unseren Videoempfängern.

    Hinweis: Der Monitor zeigt nur ein Bild, wenn ein Video-Signal eingespeist wird.

    Eigenschaften:

    • 350cd/m²
    • entspiegeltes Display
    • 90° Sichtwinkel
    • PAL und NTSC fähig
    • 16:9 (automatische Skalierung oder per Menü)
    • 9-24V Eingangsspannung
    • RGB 480x234 Pixel (bei der Größe völlig ausreichend)
    • Menü mit Enstellmöglichkeiten
    • Stromverbrauch ca. 500ma
    • Kabelsatz PLUG & PLAY für Videoempfänger Video und Power

    Lieferumfang:

    • 1x 7" Monitor
    • 1x Sonnenblende
    • 1x Stativ
    • 1x Fernbedienung
    • 1x Batterie für Fernbedienung (Knopfzelle)
    • Bedienungsanleitung

     

    Abmessungen: 17,5 x 13 x 2,4cm Gewicht: ca. 600g

Your configuration

Description

Plug and Play Globeflight SET. Just install in your cockpit and have fun.

With all 2,4 GHz RC Radios like FASST, Spektrum, Jeti Duplex compatible !

This set includes our 5,8 GHzA/V ? Sender (Tx), a matching receiver (Rx), our high quality FPV camera and all necessary cables.

Special features:
- 40 channels available, which means that more planes can fly together.
- Legal operation in the worldwide ISM band: 25mW legal in whole Europe.
- Range approx. 200m, with diversity and special antennas around 800m.

This set includes the following items:
- 5,8 Ghz A/V IRC Uno5800 receiver (Rx) with 7 channels.
- 5,8 GHz 25mW  ImmersionRC A/V transmitter (tx) with 7 channels.
- FPV Camera with Molex plug standardized for GF systems.
- Antennas for sender and receiver.
- Power cable for sender and receiver.
- A/V cable.

What else do I need?
- Video glasses (for example the Fatshark) or a PAL/NTSC capable display device (for example a TV or monitor).
- A 6-16V battery source .
- A 6-16V power source to power the receiver.

A suitable plane for this set is for example the Easystar. Obviously, it also can be installed in many different other R/C planes, which will suit your needs.

example video



Connection manual

Connection manual English

PDF
Connection manual English

Connection manual German

PDF
Connection manual German
rating
5 Stars
1
4 Stars
0
3 Stars
0
2 Stars
0
1 Star
0

Average product review

Share your experience with other customers:

Total entries: 1
Easy to install, works out of the boxx 5 from 5
., 06.01.2015

A very nice FPV beginner set which works out of the box. Just connect & fly.

more...
Total entries: 1
Persönliche Beartung zu Multikoptern vom Globe-Flight Team
Persönliche Beratung gewünscht?

Sie haben Fragen und benötigen eine kompetente Beratung? Rufen Sie uns an unter:

+49 9401 949 88-88

oder senden Sie eine E-Mail: 

info@globe-flight.de

Wir beraten Sie gern:

Montag bis Donnerstag 9-17 Uhr und Freitag 9-14 Uhr

Hotline: +49 9401 949 88-88 Mon. - Thu. 9am-5pm and Fri. 9am-2pm
worldwide shipping: We supply customers worldwide. Germany, Europe and more!
always top as regards: Our news, completely new. Everything about multicopters and FPV!
Newsletter Icon

Newsletter

News Icon

News

Academy Icon

Academy

Videos Icon

Videos

Foren Icon

Foren

KP-Index Icon

KP-Index