Latest version with Fusion receiver, which can also be bound to the smaller Connex Mini transmitters.
Amimon's CONNEX Fusion provides a high-end, high-performance wireless HD connection that can operate in challenging unmanned air or ground platforms under harsh conditions with zero latency!
The small and lightweight CONNEX system transmits commercial, industrial, inspection and monitoring video in real time to its Ground Unit, which can be located up to several 100 meters away.
Amimon Connex Fusion allows the UAV operator a much more flexible choice between size and weight to multisystem enviroment.
You can connect the Connex Mini Transmitter to the Connex Fusion Receiver and keep up the range of 1km.
This is done without compromising on range and performance on any Transmitter that the user may decide to use.
Here you can find the Amimon Connex Mini Transmitter.
- True full HD 1080P at 60fps
- Up to several 100 meters range (LOS)
- Zero latency, real-time video
- Extremely resilient 5GHz digital link
- Automatic Frequency Selection (AFS) that fully complies with regulations and automatically selects the best free frequency available
- Encrypted and secure
- Sturdy design for harsh conditions
- Built-in OSD view with embedded MAVLink-based telemetry
- OSD with DJI flight control with the optional CAN bus cable item no. 2318
- Gimbal control over Futaba® S.BUS or with other RC transmitters using the 3,5mm PPM cable
- Plug-and-Fly, ready to operate out of the box
- DFS support enables multiple free channels, thus boosting robustness
The Air Unit is connected to an aircraft in order to capture video from the aircraft camera and to transmit it to up to four Ground Units simultaneously (multicast), thus creating a wireless video link.
The Ground Unit connects to various types of monitors, video goggles or a portable video monitor via the HDMI port. This enables the pilot and/or camera operator to monitor the video transmitted from the Air Unit.
The pilot can view the video on a monitor or wear video goggles connected to the Ground Unit. Flight control (telemetry) information from the aircraft is overlaid on the video. The pilot uses a remote flight controller (not included) to control the aircraft.
The camera operator can hold a portable or PC video monitor on which the video can be viewed. The camera operator can use a gimbal remote control to control the aircraft camera?s gimbal through the S.BUS port of the Air Unit.
In the Box:
- Air Unit (Transmitter)
- Ground Unit (Receiver)
- Antennas and cables
|Transmission Distance Outdoor||Several hundred meters (LOS)|
|Transmission Delay||Zero [Less than 1 msec.]|
|Radio Frequency||5.1-5.8 GHz, 17 channels|
|Channel Selection||Automatic frequency selection [AFS]|
|Video Formats||1080p/60, 1080p/50, 1080i/60, 1080i/50, 1080p/30, 1080p25,1080p/24, 720p/60, 720p/50, 525i/60, 625i/50|
|Multicast Mode||Up to 4 receivers with no delay or quality degradation. [Requiring extra Ground Unit(s)]|
|OSD Support||MAVLink Telemetry based|
|Encryption||AES-128 & RSA 1024 for key exchange|
|Operating Temperature||0-45° Celsius|
|Regulation||CE, FCC, MIC|
|Video Interface||Mini HDMI|
|Antenna Connectors||MMCX (x2)|
|Power Input||8-26V (3S-6S)|
|Dimensions||103 x 63,6 x 15,6 mm|
|Video Interface||HDMI (Type A)|
|Antenna Connectors||SMA (x3)|
|Power Connector||DC round|
|Dimensions||129 x 89 x 20 mm|
Supported Air Unit Camera Gimbals:
Zenmuse Z15-GH4 (HD) ?, support S.BUS 6.3ms mode only
Zenmuse Z15-5D III (HD)
Supported Gimbal Remote Controls:
Futaba 14GS, FX22, 18MZ, FX32
OSD/telemetry available with the following Flight Controls:
DJI Naza V2
Persönliche Beratung gewünscht?
Sie haben Fragen und benötigen eine kompetente Beratung? Rufen Sie uns an unter:
+49 9401 949 88-88
oder senden Sie eine E-Mail:
Wir beraten Sie gern:
Montag bis Donnerstag 9-17 Uhr und Freitag 9-14 Uhr