DJI

DJI SDR Transmission 2

  • GTIN: 6937224145887
  • SKU: 12331

349,00 €
incl. 19% VAT * plus shipping costs

  • Delivery time: ca. 3 weeks (DE - int. shipments may differ)
  • Currently out of stock, goods ordered - get notification

DJI SDR Transmission 2

Multi-Group Wireless Video Transceiver

Go Small, Connect All

Ready for Complex Sets

DJI SDR Transmission 2 advances SDR technology with stronger interference resistance, better image quality, and greater range. Even on crowded sets, it maintains a high-bitrate, low-latency feed. A TX/RX switchable transceiver design and Ronin series compatibility bring pro-grade performance to a compact, lightweight form factor.

  • 1 TX to 8 RX With Control, Multi-Group Transmission
  • Auto Channel 2.0 for Seamless, Stable Feed
  • TX/RX Switchable for Flexible Deployment
  • Pairing-Free Connection for Fast Camera Switching
  • Supports Ronin Monitoring & Control
  • DCI 4K/60fps 10-bit HDR Wireless Transmission

More Reliable for Larger Sets

1 TX to 8 RX With Control, Multi-Group Transmission

1 TX to 8 RX With Control

A single transmitter feeds up to eight receivers, each with remote control. Directors and DPs get a high-resolution feed, while operators and focus pullers can adjust settings and control the camera remotely.

Multi-Group Transmission
Run up to five transmitters and 40 receivers at the same time. Even in complex on-set environments, the wireless camera feed stays stable without sacrificing 4K image quality.

Auto Channel 2.0

Smart Coordination, Enhanced Scanning
Auto Channel 2.0 takes over channel management on set. With Auto Mode enabled, transceivers recognize one another and intelligently coordinate frequencies. More accurate spectrum scanning and conflict diagnostics allow each unit to hop frequencies seamlessly as conditions change, maintaining a stable connection despite interference, even with multiple systems running side by side.

SDR, Evolved

DCI 4K Monitoring
SDR Transmission 2 transmits DCI 4K/60fps, 10-bit HDR, and H.265 video at bitrates up to 50 Mbps. The result is rich detail, smooth color transitions, and clear highlights and shadows, with consistent image quality across multiple cameras.

Up to 4 km Range
Video transmission reaches up to 4 km. From open stadiums to dense mountain forests, and through demanding car-to-car shots or FPV drone work, it sustains a reliable link where you need it most.

Latency as Low as 35 ms
Even with higher image quality, latency stays as low as 35 ms. That keeps monitoring and remote commands, like focus pulls and gimbal moves, responsive.

Flexible by Design

Compact Body, Serious Capability

TX/RX Switchable

Switch between transmitter and receiver on the fly. There is no need to decide your TX-to-RX ratio in advance, so every unit adapts to whatever the shoot calls for.

Approx. 136g Unit
The unit provides one HDMI and two USB-C ports. Its lightweight body reduces the load on handheld gimbals and mounts easily across a wide range of camera Setups.

Expansion Plate
Provides one SDI, one HDMI, and four USB-C ports. It also supports metadata transmission via SDI from mainstream cinema cameras like ARRI and RED

Transceiver Cage
For car mounts and other outdoor setups, the cage adds rugged protection with plenty of mounting points. It locks the unit firmly onto a wide range of gimbals and rigs.

Ronin Ecosystem and Beyond

Compact Systems

Integrates seamlessly with DJI RS series stabilizers. With the DJI Ronin app, a single phone handles both monitoring and control, from operating the gimbal wirelessly to starting and stopping recording.

Pro Productions
Supports DJI Ronin 2 and Master Wheels. Even with large cinema cameras on complex car mounts or crane rigs, operators can stay at the monitor and precisely control each move through the wheels.

Action Angles
Connect an Osmo Action or Pocket series device over USB-C for sports, reality shows, and hard-to-reach angles. It offers a lightweight way to add a remote monitoring feed from perspectives that larger rigs cannot cover.

Professional Monitoring and Control

Camera Switching

No more rebooting, scanning, and re-pairing. Switch between camera feeds from the transceiver or the DJI Ronin app, saving valuable time on set.

Monitor Feed
Delivers an ultra-high-definition, low-latency feed to professional monitors over SDI, HDMI, or DP, so multiple monitors can share the same clean image.

Mobile Feed
For monitoring on the move, connect a phone or tablet to the receiver over USB-C and view the feed in the DJI Ronin app. A wired link keeps it stable and high-bitrate.

DJI Ronin App Monitoring Assistance Tools
The app supports professional monitoring tools such as LUT, histogram, waveform, and false color, delivering a more efficient and precise monitoring experience.
LUT 
Histogram
Waveform 
False Color

PTP/CEC Camera Control
DJI SDR Transmission 2 supports PTP camera control, allowing users to view and adjust aperture, shutter speed, and ISO settings, while also enabling photo capture and video recording through the app. Additionally, it supports CEC control for Sony cameras, activating Mirror Control mode.

Control for the RS Series Stabilizers
The transceiver can wirelessly control RS Series stabilizers via the DJI Ronin app, supporting Force Mobile, virtual joystick, and gimbal recentering features.

Power Supply Solutions

NP-F Power Supply

The transceiver supports industry-standard NP-F battery types with a voltage range of 6.8 to 8.4 V.

USB-C Power Supply
SDR Transmission 2 can be powered by a standard PD protocol charger via USB-C, with a power input rated at 15 V/9 V and 3 A.

Gimbal Power
Thanks to the integrated power supply design, the transceiver can be mounted on and powered directly by DJI RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, or Master Wheels, eliminating the need for a separate battery.

In the Box:
1x SDR Transmission 2 Transceiver
1x SDR Transmission 2 Camera Cold Shoe Adapter
1x SDR Transmission 2 NP-F Battery Adapter
1x Firmware Update Cable (USB-C to USB-C, 50 cm)

In the Box:

1x SDR Transmission 2 Transceiver

1x SDR Transmission 2 Camera Cold Shoe Adapter

1x SDR Transmission 2 NP-F Battery Adapter

1x Firmware Update Cable (USB-C to USB-C, 50 cm)

DJI SDR Transmission 2

General

Transceiver


Weight Approx. 136 g (including antennas)

Dimensions 76×61×25 mm (L×W×H, excluding antennas and Cold Shoe Adapter)

Ports HDMI: Input/output
USB-C (Top): PD power input/output
USB-C (Bottom): DP input/output, PD power input/output, device activation and firmware updates, log export, phone app connection, and connection to the DJI Ronin series*, Osmo Action 6**, and Osmo Pocket series** devices
The SDI port is available on the DJI SDR Transmission 2 Expansion Plate, which is sold separately.
* Supported models include DJI RS 5, RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, and Master Wheels.
** Supports Osmo Action 6 and Osmo Pocket series (Osmo Pocket 4 and later) via USB-C for monitoring and power supply.

Operating Frequency Non-DFS Frequency Band:
2.400-2.4835 GHz
5.150-5.250 GHz
5.725-5.850 GHz
DFS Frequency Band:
5.250-5.350 GHz
5.470-5.725 GHz
The 5.8 GHz and DFS frequency bands are prohibited in certain countries/regions. Check local laws and regulations for more information. 5.600-5.650 GHz is not used.

Transmitter Power (EIRP) 2.400-2.4835 GHz:
< 20 dBm (SRRC/CE/MIC)
5.150-5.250 GHz:
< 23 dBm (SRRC/CE/MIC)
5.250-5.350 GHz:
< 23 dBm (SRRC/CE/MIC)
5.470-5.725 GHz:
< 26 dBm (CE/MIC)
5.725-5.850 GHz:
< 30 dBm (SRRC)
< 14 dBm (CE)

Maximum Bandwidth 40 MHz

Maximum Encoding Bitrate 50 Mbps
The maximum encoding bitrate is 50 Mbps, measured under controlled conditions. Actual encoding and transmission bitrates may vary depending on the environment and transmission distance.

Power Consumption Standby (no external devices connected):
Single Transmitter: Approx. 5.04 W
Single Receiver: Approx. 5.31 W
1T1R Transmission:
Main Unit: Transmitter approx. 8.52 W, receiver approx. 7.58 W
Each Unit With an Expansion Plate (SDI input/output): Transmitter approx. 10.36 W, receiver approx. 8.89 W
Measured at a room temperature of 25 °C (77° F), at a distance of approximately 10 meters, in a 1T1R setup, using PD for power supply.

Power Supply USB-C Power Supply Type 1: 15 V, 3 A (PD protocol*)
USB-C Power Supply Type 2: 6.8-17.5 V DC
NP-F Battery Power Supply Voltage: 6.8-8.4 V
* A PD power adapter with an output of 65 W or above is required.

Video I/O Formats DCI 4K: 23.98/24/25/29.97/30/50/59.94/60 fps
4K UHD: 23.98/24/25/29.97/30/50/59.94/60 fps
1080p: 23.98/24/25/29.97/30/50/59.94/60 fps
1080i (input only on the main unit; input/output on the Expansion Plate): 50/59.94/60 fps
720p: 50/59.94/60 fps
4K video format is only supported via the HDMI port and the bottom USB-C port of the transceiver main unit.

Audio I/O Formats Input Audio Format: SDI embedded, HDMI embedded, DP embedded
Output Audio Format: 16-bit, 48 kHz, stereo PCM

Video Transmission System SDR

Minimum Video Transmission Latency 35 ms
Camera and screen display latency are not included. Measured when shooting 1080p/60 fps and 4K/60 fps video.

Video Coding Format H.265

Maximum Transmission Distance 4 km (CE)
Measured under CE compliance using one TX and one RX in open, unobstructed, and interference-free controlled conditions.

Operating Temperature -10° to 40 °C (14° to 104° F)

Expansion Plate

Weight Approx. 105 g

Dimensions 76×54×25 mm (L×W×H, excluding Cold Shoe Adapter)

Ports HDMI: Input/output
USB-C (Right): Power supply and DJI RS 5 connection
USB-C (Bottom): Power supply, camera control (photo capture and recording start/stop), and connection to DJI Ronin series devices* other than DJI RS 5
SDI: Input/output
* Supported models include DJI RS 4 Pro, RS 4, RS 3 Pro, Ronin 2, and Master Wheels. Please note: When using with Ronin 2 or Master Wheels, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to 4-pin) is required (sold separately). When using with RS 4 Pro, RS 4, or RS 3 Pro, the DJI SDR Transmission 2 Gimbal Control Cable (USB-C to CAN) is required (sold separately).

Power Supply USB-C Power Supply Type 1: 15 V/9 V, 3 A (PD protocol*)
USB-C Power Supply Type 2: 6.8-17.5 V DC
* A PD power adapter with an output of 65 W or above is required.

Operating Temperature -10° to 40 °C (14° to 104° F)

Transceiver Cage

Weight Approx. 91 g

Dimensions 124×110×49 mm (L×W×H)

Mounting NATO port
1/4″-20 screw hole × 2
3/8″-16 screw hole
HDMI cable clamp
USB-C cable clamp

Operating Temperature -10° to 40 °C (14° to 104° F)

Statutory Warranty

All goods offered in our shop are subject to the statutory warranty rights.

If the goods delivered are defective, consumers have the statutory right to subsequent performance (repair or replacement). If the statutory requirements are met, consumers may also be entitled to further remedies such as a reduction of the purchase price, withdrawal from the contract, or compensation for damages.

Any additional manufacturer's warranties apply independently of the statutory warranty rights and do not restrict them.

The details are set out in the statutory warranty label below.

Manufacturer

Name: SZ DJI Technology Co.,Ltd

Street: Lobby of T2, DJI Sky City, Xianyuan Road, Xili Community, Xili Street, Nanshan District No. 53

Location: 518057 Shenzhen

Country: China

E-Mail: support@dji.com

Homepage: https://www.dji.com

Responsible person

Name:DJI GmbH

Street:Industriestrasse 12

Location:97618 Niederlauer

Federal State:Bayern

Country:Deutschland

E-Mail:support.eu@dji.com

Homepage:https://www.dji.com

Sicherheitshinweise für die Nutzung von Drohnen

  1. Einhaltung der Gesetze

    Bitte halten Sie sich an die lokalen und nationalen Gesetze für den Betrieb von Drohnen. Informieren Sie sich vor dem Flug über die geltenden Vorschriften.

  2. Registrierung

    Stellen Sie sicher, dass Ihre Drohne registriert ist, falls dies gesetzlich vorgeschrieben ist. Dies ist oft notwendig, bevor Sie Ihre Drohne fliegen dürfen.

  3. Flugverbotszonen

    Fliegen Sie nicht in Flugverbotszonen wie Flughäfen, Naturschutzgebieten oder dicht besiedelten Gebieten. Informieren Sie sich über die erlaubten Flugzonen in Ihrer Region.

  4. Sichtweite

    Fliegen Sie Ihre Drohne immer in Sichtweite. Vermeiden Sie es, die Drohne aus den Augen zu verlieren, um die Kontrolle zu behalten.

  5. Höhenbegrenzung

    Halten Sie sich an die maximal erlaubte Flughöhe für Drohnen in Ihrer Region. Dies hilft, Kollisionen mit anderen Flugobjekten zu vermeiden.

  6. Sicherheitsabstand

    Halten Sie einen sicheren Abstand zu Menschen, Tieren und Gebäuden ein. Dies schützt sowohl die Drohne als auch die Umgebung.

  7. Wetterbedingungen

    Fliegen Sie Ihre Drohne nur bei guten Wetterbedingungen. Vermeiden Sie starke Winde, Regen oder andere extreme Wetterlagen.

  8. Privatsphäre

    Respektieren Sie die Privatsphäre anderer. Vermeiden Sie es, ohne Erlaubnis Bilder oder Videos von Personen aufzunehmen.

  9. Wartung und Inspektion

    Überprüfen Sie Ihre Drohne regelmäßig auf Schäden und führen Sie notwendige Wartungsarbeiten durch. Dies verhindert technische Probleme während des Fluges.

  10. Notfallmaßnahmen

    Seien Sie auf Notfälle vorbereitet. Wissen Sie, wie Sie Ihre Drohne sicher landen können, falls ein technisches Problem auftritt.

  11. Versicherung

    Wir empfehlen den Abschluss einer Haftpflichtversicherung für den Betrieb Ihrer Drohne. Dies schützt Sie im Falle eines Unfalls oder Schadens.

Sicherheitshinweise für die Lagerung und Verwendung von Lithium-Akkus

  1. Lagerungstemperatur

    Bewahren Sie Lithium-Akkus an einem kühlen, trockenen Ort auf. Die ideale Lagertemperatur liegt zwischen 15°C und 25°C.

  2. Feuchtigkeit vermeiden

    Halten Sie die Akkus fern von Feuchtigkeit und Wasser. Lagern Sie sie in einem trockenen Raum, um Korrosion und Schäden zu vermeiden.

  3. Direkte Sonneneinstrahlung vermeiden

    Setzen Sie die Akkus nicht direkter Sonneneinstrahlung aus. Hohe Temperaturen können die Akkus beschädigen und die Lebensdauer verkürzen.

  4. Feuergefahr

    Lagern Sie Lithium-Akkus niemals in der Nähe von brennbaren Materialien. Im Falle eines Defekts können sie Feuer fangen.

  5. Beschädigte Akkus entsorgen

    Verwenden Sie keine beschädigten oder aufgeblähten Akkus. Entsorgen Sie diese sicher gemäß den lokalen Vorschriften.

  6. Ladegeräte verwenden

    Verwenden Sie nur die vom Hersteller empfohlenen Ladegeräte. Falsche Ladegeräte können zu Überhitzung und Schäden führen.

  7. Überladung vermeiden

    Laden Sie die Akkus nicht über die empfohlene Kapazität hinaus. Überladung kann zu Überhitzung und im schlimmsten Fall zu einem Brand führen.

  8. Kurzschlüsse vermeiden

    Vermeiden Sie Kurzschlüsse, indem Sie die Kontakte der Akkus nicht mit Metallgegenständen in Berührung bringen.

  9. Regelmäßige Überprüfung

    Überprüfen Sie die Akkus regelmäßig auf Schäden oder Abnutzung. Ersetzen Sie alte oder beschädigte Akkus rechtzeitig.

  10. Notfallmaßnahmen

    Halten Sie geeignete Löschmittel bereit, um im Falle eines Akku-Brandes schnell reagieren zu können. Ein Feuerlöscher für Lithium-Brände ist empfehlenswert.

  11. Entsorgung

    Entsorgen Sie Lithium-Akkus nicht im Hausmüll. Bringen Sie sie zu einer Sammelstelle für Batterien oder Elektronikschrott.

DJI SDR Transmission 2

349,00 €