Flir Muve C360 - Multiple gas detector for DJI M210

Item number: 5447

EAN: 4251522813593

Manufacturers : FLIR

Let us help now
+49 9401 949 88-88


Flir Muve C360 - Multiple gas detector for DJI M210

The FLIR MUVE C360 is a multi-gas detector completely integrated with a unmanned aerial system (UAS) to provide real-time continuous Monitoring of chemical hazards while on the move. The sensor block boasts 8-channels, which includes a photoionization detector (PID), Lower Explosive Limit (LEL) detector, and five other electrochemical sensors. The MUVE C360 sensor block quickly latches to a proprietary integration dock mounted to the UAS. The FLIR calibration station features the same dock, so the operator can easily connect for routine sensor verification. Sensor readouts are prioritized based on alarm conditions and are displayed realtime through the pilot’s user interface. The MUVE C360 is a time-saving, game-changer for emergency responders, industrial safety officers, and environmental monitoring experts.

Assess the Scene from a safe distance
Before putting the health and safety of your team at risk, fly the C360 into the scene to gather initial assessment of hazards

  • 8-channel sensor delivers broad hazard coverage
  • Analyze air quality surrounding active Scenes prior to entry
  • Select proper PPE before entering scene
  • Locate leak source and track incident progression


Significantly reduce the time to action
Deploy the C360 on scene in the time it takes the average responder to suit up

  • Cover difficult terrain from the air to assess hazards
  • Quickly draw a perimeter to assess and map hazards
  • Preset alarm thresholds to make quicker decisions on-scene
  • Understand the flow of hazardous vapors at the source, but also in the air


Fully Integrated Situational Awareness
Get a comprehensive overview of an active scene including visuals and chemical identification

  • FLIR VueLink App provides plug-and-Play control of the C360, flight operations, and other on-board sensors
  • Analyze, log, and access complex data in an easy-to-understand visual overlay
  • Install with click-in simplicity via OnBoard integration dock

Specifications

Sensor Block Technology
Sensors: CO, Cl2, O2, NO2, H2S, SO2, LEL
PID: VOC 10.6 eV (ppm)
FLIR Calibration Station: Proprietary automatic calibration design, includes four (4) gas regulators, tubing, and power adaptor


Sampling & Analysis
Sample Introduction: Actively pumped via integrated snorkel
Sampling Rate: 300 ml/min minimum
Sampling & Analysis: Real-time detection


System Interface
Display & Alerts: FLIR VueLink™ application integrated via tablet connected to the UAS remote controller
Communication: Remote controller via USB-A accessory (tablet); UAS power port and serial (C360)
Wireless Range: Determined by the UAS range
Data Storage: Sensor data and flight information logged on tablet
Training Requirements: <30 mins for operator; 4 hours for advanced user


Power
Input Voltage: 24V DJI Matrice 210; 12V FLIR Calibration Station
Battery Specification: Powered by the UAS
Cold Start Time: 90 seconds from cold start


Environmental
Operating Temp: -4 to 122 °F (-20 to 50 °C)
Operating Humidity: 10 to 93%, non-condensing
Storage Temp: -22 to 158 °F (-30 to 70 °C)
Protection: IP43-rated


Physical Features
Dimensions (L x W x H): 6.5 x 2.3 x 2.0“ (16.51 x 5.84 x 5.08 cm) - C360 only
Total Payload Weight: 1.5 lb (680.39 g) - C360 with dock and snorkel
Compatibility: Currently compatible with DJI Matrice 210, V1 and V2, UAS
Integration Dock: Proprietary quick-connect mount for UAS and FLIR Calibration Station

 

Hotline: +49 9401 949 88-88 Mon. - Thu. 9am-5pm and Fri. 9am-2pm
worldwide shipping: We supply customers worldwide. Germany, Europe and more!
always top as regards: Our news, completely new. Everything about multicopters and FPV!