Gremsy T3 Industrial Gimbal
Inherit the dominant technologies of Gremsy T1, we created a lightweight gimbal ready to fly with almost mirrorless, DSLR camera setups.
The T3 features the ease of use and freedom to move thanks to its smart design of Hyper Quick Release and 360-continuous pan rotation ability. Altogether, plus Canlink seamlessly integrated, bring out the most outstanding footages with no horizon drift, excel every aerial filmmaker's expectation.
Hyper Quick Release
No cables, just push it in, twist to lock, and it's done. Included 12V BEC built in the new mechanical and electrical integration Hyper QR, the T3 can get power directly from flight battery and it also provides the auxiliary 12V to power any other accessory that you may have.
New I/O Design
Intuitive hardware interface including POWER, CAN, COM, SBUS, AUX ports has relocated on QR to quickly interface with multiple devices such as 3rd party flight controller, remote control, auxiliary I/O and power your ideal system of cameras/accessories.
Provide 12V output (2A max) to power camera and accessories and there are S1, S2, S3 optional signals (1A max) for users to connect to other devices such as AV signal, camera trigger, PWM control signal, etc. This port is internally connected to AUX port on the camera tray.
Clean design internal wiring
Simplicity is the ultimate sophistication (Leonardo Da Vinci).
All wires are protected to ensure your creativity.
Heated & temperature controlled IMU
The T3 uses 3-axis accelerometer and 3-axis gyroscope IMU to ensure that it performs accurately and efficiently.
Heated and temperate controlled IMU sensor is protected by an aluminum-made box. This allows for a flawless operation in too high or too low ambient temperatures.
High-Performance Gimbal Controller
The gMotion Controller, designed and made by Gremsy offers unparalleled professional stabilization properties at 32-bit level. Sensor data and motors correction are updated as fast as 2000 times per second to enable incredibly smooth footage.
Weight & Dimensions
Saving your load with compact and lightweight construction of only 1.05 kg. Less weight means more time to fly.
Weight/ Maximum Payload 2.31 lbs / 3.7 lbs
Dimension (W x D x H): 236 x 179 x 288 mm
Camera Case (W x L x H): 152 x 100 x 120 mm
Canon 6D Mk I, Mk II
Nikon D810, D800, D500
Panasonic GH3, GH4, GH5
Sony A6000, A6300, A6500
Sony A7S (mk I - II)
Sony A7r (mk I - II)
With tool-free balancing design, now you can get your camera setup done within 1 minute by hand.
Freedom to move
Thanks to continuous 360° pan capability, 330° tilt & roll rotation, the T3 allows filmmakers to perform unrestricted and incredible camera moves. Never miss any angle of your eagle eyes!
Drift free horizon
With Canlink seamlessly integrated, the T3 is able to communicate with DJI and Pixhawk flight controllers to straighten your horizon.
Intuitive App and Software
iOS & Android apps and software allow users to change the
setting of gimbal easily via WIFI connection.
1. Operation Modes: Follow Mode, Lock Mode, Built-in, independent IMU module
2. Temperature Sensor
3. Gremsy Specialized Gimbal Drive Motors with Encoders
4. USB Connection
5. Gremsy Advanced 32-Bit high performance ARM microprocessor
6. S-Bus/Spektrum/PPM Receiver Supported
MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current: Static current: 300mA (@12V), Dynamic current: 600mA (@12V), Locked motor current: Max 3.5A (@12V)
Operating Temperature: 5° F ~ 120° F (-15° C ~ 50° C)
Weight: 2.31 lbs (1050 g)
Gimbal Dimension: 236(W) x 179(D) x 288(H)
Camera Tray Dimensions:
Maximum depth from the center of gravity on camera base plate: 100mm
Maximum height measured from top of camera base plate: 120mm
Maximum width: 152mm
Input Power: 12-52V
Connections: Wifi, USB 2.0, CAN, UART, S-bus, Spektrum, PPM
PC Assistant Software Requirements: Windows XP or above; Mac OS X 10.9 or above
Mobile Assistant Software Requirements: iOS 7.1 or above; Android 4.3 or above
Maximum Payload 3.7 lbs (1700 g)
Angular Vibration Range ± 0.02°
Maximum Controlled Rotation Speed
Pan axis: 200°/s
Tilt axis: 100°/s
Roll axis: 30°/s
Mechanical Endpoint Range
Pan axis control: 360°
Tilt axis control: +270° to -150°
Roll axis control: ± 110°
Controlled Rotation Range
Pan axis control: 360°
Tilt axis control: +90° to -135°
Roll axis control: ± 45°
Persönliche Beratung gewünscht?
Sie haben Fragen und benötigen eine kompetente Beratung? Rufen Sie uns an unter:
+49 9401 949 88-88
oder senden Sie eine E-Mail:
Wir beraten Sie gern:
Montag bis Donnerstag 9-17 Uhr und Freitag 9-14 Uhr