Introducing RedEdge-P: The ultimate solution for high-res RGB and multispectral data
The RedEdge-P is the rugged, high-quality, powerful multispectral sensor you’ve come to trust, now with a high-resolution panchromatic band for pan-sharpened output resolutions of 2cm (at 60m) - twice the ground resolution of the industry-standard RedEdge-MX. It is a single camera solution that captures calibrated high-resolution multispectral and RGB imagery, with an optimized FOV and capture rate for efficient flights. This solution seamlessly integrates a high-resolution all-color imager with synchronized multispectral imagers to enable pixel-aligned outputs at previously unattainable resolutions while maintaining the efficiency and reliability of the RedEdge legacy. Raw data from RedEdge-P is open for processing using the standard household softwares in the industry.
Kit Contents //
- RedEdge-P sensor
- DLS 2 with embedded GPS
- Calibrated Reflectance Panel (CRP 2)
- USB WiFi dongle
- Lens cover
- Necessary integration cables
- Assorted mounting hardware
- CFexpress card
- CFexpress card reader
- Hard Carrying Case
- Quick Start Guide
Specifications //
- Weight: 300g (10.6 oz.) RedEdge-P + DLS 2
- Dimensions: 8.2 x 6.2 x 5.4 cm (3.2in x 2.4in x 2.1in)
- External power: 7.0 V - 25.2 V
- Spectral bands: Blue, green, red, red edge, near-IR (global shutter, narrowband)
- Wavelength (nm): Blue (475 nm center, 32 nm bandwidth), green (560 nm center, 27 nm bandwidth), red (668 nm center, 14 nm bandwidth), red edge (717 nm center, 12 nm bandwidth), near-IR (842 nm center, 57 nm bandwidth)
- RGB output: 5.1 MP (global shutter, aligned with all bands)*
- Ground sample distance: 7.7cm per pixel (per MS band) at 120m AGL 3.98cm per pixel (panchromatic band) at 120m AGL
- Capture rate: 2-3 captures per second raw DNG
- Interfaces: 4 GPIO: Trigger input, top of frame out, 1 PPS out, host button. USB 2.0 port for WiFi, serial, 10/100/1000 ethernet, and CF Express Storage.
- Field of view: o 49.6° HFOV x 38.3° VFOV (MS) o 44.5° HFOV x 37.7° VFOV (PAN)
- Triggering options: Timer mode, overlap mode, external trigger mode (PWM, GPIO, serial and Ethernet options), manual capture mode
- Heat: 0-40C ambient (no airflow); 0-50C ambient with airflow >0.5m/s * with appropriate post-processing
Note: Specifications are subject to change without notice
