QuickInstall integration kit RedEdge-M to DJI Matrice 200 series
With this conversion kit you can easily transform your DJI M200 or M210 into a professional carrier of the MicaSense RedEdge-M multispectral camera! All elaborately manufactured 3D printing parts are extremely resistant and have a slight elasticity.
The RedEdge-M can be completely disassembled within one minute with the integration kit, so that the M200 / M210 can be transported in the original case again.
All you have to do is screw the camera to the mounting bracket and attach the external GPS holder to the M200, for final assembly / disassembly for use only carry the cables up and secure the GPS / DLS holder with 4 screws. The power bank holder is simply clipped and the battery inserted. With the 2 included batteries, several flights are possible without problems, since the power consumption of the camera is relatively low.
Using power banks instead of the power port (on the M210) preserves the IP43 certification of the drone.
The camera holder is equipped with an adjustable joint, in which a scale with 10 ° steps was incorporated. Thus, the lead angle can be easily adapted to the planned airspeed to get vertical shots.
Important note: For use with an M200, the external GPS mount is also required. required.
In the Box:
Pre-assembled camera holder with DJI Zenmuse adapter
GPS / DLS holder
Power Bank Holder
2x powerbank battery
Mounting hardware / Screws
Persönliche Beratung gewünscht?
Sie haben Fragen und benötigen eine kompetente Beratung? Rufen Sie uns an unter:
+49 9401 949 88-88
oder senden Sie eine E-Mail:
Wir beraten Sie gern:
Montag bis Donnerstag 9-17 Uhr und Freitag 9-14 Uhr