Hintergrund Picture

Jeti

  • Jeti DC-16 Duplex Monitor Mount for 1/4" thread (e.g. Black Pearl)

    + -
  • Jeti DC-16 Duplex Pultfernsteuerung 16 Kanal - Mode 5 (2x Feder)

  • Jeti DS-16 Hand Sender Duplex 16 Kanal - Mode 2/4 ( Gas Links)

  • Jeti DS-16 Hand Sender Duplex 16 Kanal - Mode 5 (2x Feder)

  • Jeti DC-16 Duplex Hand Rest

  • Jeti DC-16 Duplex Haltebügel

  • Jeti DC-16 Duplex Pult

  • Jeti Kreuzgurt

  • Jeti Receiver Duplex R9 EX

  • Jeti Receiver Duplex R10 EX

    + -
  • Jeti Receiver Duplex R14 EX

    + -
  • Jeti Receiver Duplex R18 EX

    + -
  • Jeti Receiver Duplex Rsat 2 EX

  • Jeti MULI Voltage Sensor Duplex EX up to 6S

    + -
  • Jeti Voltage and Current Sensor Duplex EX MUI75

    • Assignment of the MUI EX sensor is measurement of voltage, current and consumed capacity of flight batteries in the model. The wireless data transmission by the DUPLEX 2,4GHz system is monitored by the JETIBOX terminal.

      For communication purposes the Duplex system takes advantage of the 2,4 GHz band which, besides sending remote control data to the model, also receives data from the model back to the transmitter. During a flight, obtained telemetric data are transmitted in real time and the actual values of the measured data can be displayed on the JETIBOX LCD. Telemetric MUI sensors execute voltage and current measurements in your model and transmit these informations with the aid of the DUPLEX system (receivers and transmitter modules). Thanks to exact current measurements these sensors make it possible to trace the spent capacity of the measured battery. The MUI unit is recording the spent current flow time and its average as well as maximum value. Furthermore it offers exact voltage measurements and recordings of voltage minimum and maximum values.
      The task of parameter adjustment and measured data setup is performed by the well known talent ? the JETIBOX terminal.

      MUI sensors allow setting of acoustical signals in order to announce violation of set parameters. Such alarms may be set for measuremets of maximum current and minimum voltage as well as for a maximum of consumed battery capacity. The sound signal is generated by a siren integrated in the transmitter module. For better differentiation the particular alarms are distinguished by Morse alphabetic letters. The acoustical alarm generation in case of parameter violation is working even if the JETIBOX is not connected. With the JETIBOX in place, the LCD display shows which parameter has been violated. In case of violation of several parameters the alerts alter consecutively as well as the indications on the LCD display.

  • Jeti Voltage and Current Sensor Duplex EX MUI200

  • Jeti Vario EX 2 Duplex

    • MVario2 EX is a system that measures atmospheric pressure and using the obtained data it calculates the altitude above sea level, airspeed, and the rate of climb as well as the rate of descent. Changes in climb and descent rates are signaled as well. The sensor also alerts you if any alarm setting is exceeded. The sensor data can also be transmitted via the Duplex system to the user.

    + -
  • Jeti MGPS EX

  • Jeti Expander E4 EX

    • The EXPANDER E4 EX module is used to expand the number of connecting slots for further telemetric sensors. In this way it becomes possible to connect up to 4 sensors to a DUPLEX receiver. The expander can be set in a way which enables the JETIBOX to show several measured values simultaneously.

  • Jeti Expander E2 EX

  • Jeti USB-Adapter Duplex EX

  • Jeti PPM DSC Buchse (mono) für Jeti Duplex DC16 Sender

  • Jeti Measure Sensor MU3 EX

    + -
  • Jeti Stick for DC-16 Potentiometer

    + -